Xdeep HYDROS 50 Wing

double-tank/twinset wing 50lbs

Color
zł974.80
Tax excluded
Dispacth 1-3 days
Payment visa paypal mastercard

XDEEP HYDROS 50 Wing

Specification:

Basic parameters
Type: Wing style, double layer toroidal buoyancy compensator
Buoyancy: 22 kg (50 Lbs)
Outer shell: Cordura 1100dTEX
Inner bladder: Nylon 440dTEX with 0.215mm coating
Access to the inner bladder: YKK Vislon zipper
Spacing of the mounting holes: 279mm (11 inches)
Weight: 1.3 kg
Inflator
Type: K-type piston inflator
Supply pressure: 6 bar to 17.23 bar
Corrugated hose length: 34cm (14 inches)/40cm (16 inches)/48cm (19 inches)
Over pressure relief valve
Number of valves: One
Placement: On the left, at lower part of the BC
Suggested tank parameters
Typ: Doubles
Maximum tank size: 2x15 litres
Operating temperature
Water: -2°C to 40°C
Air: -20°C to 60°C
CE Certification

The product we offer is supplied in a set as follows:
- Buoancy compenstator HYDROS 50
- LP hose 

Perfect buoyancy for 2x12 twinset + stage


The buoyancy of HYDROS 50 wing totals 23 kg, thanks to which it is perfect for diving with 2x12 twinset and stage providing sufficient reserve of buoyancy in case of emergency.
HYDROS 50 is a perfect wing for ambitious technical dives and will also work well for advanced recreational dives.


Better trim and greater stability


HYDROS 50 model was built in such a way that its centre of buoyancy is placed on exactly the same level as the gravity centre of gas in the cylinder. Thanks to this, the trim does not change during the entire dive and remains the same with full and empty cylinders.
The geometry of HYDROS model, especially its contour, provides properly significant righting moment, which makes it a lot easier to reach the correct horizontal position.

 
Easy access to valves


To make access to the valves easier, we massively reduced the dead zone in the upper part of the bladder to the minimum. As a result, there is no "loose cloth" effect which makes access to valves difficult while doing a V-Drill.
The reduced bladder volume in the place where hoses are situated makes guiding them also much easier.


High surface position


In the HYDROS 50, we reduced to minimum the part which sticks out above the water while the diver is surfaced. Therefore, the significant part of the displacement is used effectively to keep the diver surfaced.
You will feel the difference during high wave dives at sea, especially when you have with you full stage cylinders.


Super-resistant Cordura®


The outer shell of the HYDROS model is made of highly durable Cordura® 1100 dTEX produced in Germany.
For safety reasons, no one needs to be convinced that you need a very durable outer shell for wreck diving. 
Also, remember that the Cordura® fabric is definitely more abrasion-resistant than other materials. Compared to other wings made of less expensive materials, the HYDROS model stays NEW for a longer period of time.


Choose the inflator with optimal length


The comfort related to the use of inflator depends on its length. An inflator which is too long or too short may even cause the best wing or jacket to be uncomfortable to use.
Depending on your height, you need an inflator of greater or smaller length. When you order HYDROS wing, you can choose from three different lengths of the inflator hose: 14", 16" or 19". You are sure that your set will ideally match your needs.


Anti-bacterial coating


Have you ever wondered why scuba divers have so much sinus trouble?
Moisture inside the wing is an ideal place for bacteria, including the pathogenic ones. You know perfectly that sinus trouble can force you to refrain from diving for many weeks. 
In order to reduce that risk, the inner bladder of ZEOS wing contains antibiotic agent preventing the development of bacteria.

Be aware that we are not sending XDEEP products to USA, CANADA & AUSTRALIA

BC-H50-0

Specific References

ean13
5902686680048
Comments (0)
Free Shipping